General Information

UC290, having same firmware with SME29X modules, and enclosed with a double color elegance ABS enclosure. It is ideal to make your existing or new system ethernet connected without struggling any hardware or mechanical design prodecures. It allows Ready-To-Go feature, and can help your system to be controlled or communicate remotely thru ethernet network.

UC290 does not require any external microcontroller or PC to be controlled; it simply translates Ethernet and Serial data to each other with the minimum latency based on UDP protocol.

UC290 UDP Ethernet converter can be used with existing serial devices without any design change in hardware. However Virtual Com Port is not supported, so software side should use UDP Sockets. UDP Socket examples comes with evaluation kits. Using UDP Sockets is easier than using a com port.  Alternatively, by using two of UC290 ethernet converters at both end of communicating devices, any two of these serial devices can be connected as "Virtual Wire", resulting in; no software change and so no need to use UDP sockets in the existing systems.

UC290 is very simple to use after getting know basics of Ethernet network.

UC290 is a very effective product that does not require any design obstacles, and a serial device can be connected to the world just in minutes.

UC290 can be purchased from our online store.

Features

• Connects any serial device to LAN/WAN/Internet

• True Serial-Ethernet Conversion. No Control Mechanism is required.

• Plug & Play, no need for initializations in run-time.

• Can be created a "Virtual Wire", if two of ethernet module connected both ends of communicating devices. There wont be any need of any software implemantation or change with "Virtual Wire" implemantation.
  Existing serial devices can connect each other just in seconds, and apart from each other even in world's different places.

• Based on UDP protocol, 10BaseT

• Serial/UART Interface up to 115200bps (57600bps Default)

• Configurable thru RS232 or Ethernet (LAN)

• Firmware Upgrade-able with encrypted ROM images

• Ideal for embedded applications, better alternative than RS485.

• Ideal for existing serial devices.

Pricing Information

UC290

Reference price for 1 pc $79/ea
Better prices are available for higher quantites.

Click to buy this item from our online store

Support

• Datasheet
• User Manual
• Application Notes
• Upgrades
• Software Downloads
• Knowledge Base
• Announcements