General Information

SM125-EK is the best point to start and evaluate our 125 KHZ RFID products. It includes everythnig for a basic 125 KHz RFID application. It can be used to develop your application quickly or it can simply demonstrate main features of the SM125 chip or module.

Users can develop, evaluate or test 125KHz RFID proximity applications with this kit. Users can either connect the kit to PC thru serial port (or USB-Serial converter) or any other peripheral device (e.g. microcontroller thru UART, I2C ) Evaluation kit provides PC Connectivity , Input/Output pins for the Module , control pins for 2x16LCD and other features of the Module(GPIO , Uart , I2C , SPI , LCD)

SM125-EK kit can also be used as RFID Programmer for Atmel/Temic tags(e.g. Q5 ,T5555, T5551, T5552, T5554, T5557, T55xx)

SM125-EK can work with a 9V battery/Power Supply, or a 3.3V / 5V supply directly.

Kit Content

1x SM125-EK Main Board 
1x SM125-M1-232 Module 
1x IND25-1 Antenna (65x35mm)
1x IND25-2 Antenna (90x45mm)
1x IND25-3 Antenna (40x12mm)
2x EM4102 ISO Card (Read Only) 
2x T5567 ISO Card (re-writeable) 
1x Swicth Mode DC Adapter (Optional)
1x Serial Port Cable
1x Software & Documents CD

Features

• Quick development and demonstration of SM125 devices

•  Adapter or battery operation. Appropriate for most DC adapters ( 9VDC - 12VDC) those having 2.1mm female jack (DC Adapter is included in SM125-EK-D)

•  On board regulator for 5V and 3.3V operations. Easy to test applications with different voltage sources (* 3.3V requires different firmware version) 

•  LCD connector for 2x16 LCDs.

•  GPIO and communication pins(I2C/UART) available

•  3x SMD LEDs can be used for visual effects

•  SMRFID 3.x - Easy to use software

Pricing Information

Click to buy