SUPERIOR CUSTOMER SUPPORT
|
|
|
|
SUPERIOR CUSTOMER SUPPORT |
|
| SME290 Serial Ethernet Module |
| SME291 Serial Ethernet Module |
| SME1029 Evaluation Kit |
| SME2029 Evaluation Kit |
| SM1013 RFID Evaluation Kit |
| SM1320USB RFID Evaluation Kit |
| SM130 RFID Module |
| SM132USB RFID USB Reader Module |
| Transponder / Tag |
| Antenna |
| 125 KHz RFID |
| 13.56 MHz RFID - MIFARE |
| 2.4 GHz Wireless |
| Serial Ethernet |
| 3rd Party Projects |
| User Forums |
| FAQ |
| 125 KHz RFID Home Page >Technical Support Area >125 KHz RFID - Firmware Upgrade |
SM125-EK GENERAL FEATURES |
| Quick development and demonstration of SM125 devices |
| Adapter or battery operation. Appropriate for most DC adapters those having 2.1mm female jack (range 7.5VDC-15VDC) |
| On board regulator for 5V and 3.3V operations. Easy to test applications with different voltage sources (* 3.3V requires different firmware version) |
LCD connector for 2x16 LCDs. |
GPIO and communication pins(I2C/UART) available |
3x SMD LEDs can be used for visual effects |
| SMRFID - easy to use software |
125 KHz RFID - COOL FEATURES |
| User Programmable Assembler Code( ~4K, can be extended).No need for external microcontroller |
| Upgradable with the specific softwares.Customizable according to user needs |
| Automatically decodes the Manchester RF 32 / 64 signals with strong manchester decode algorithm and makes data ready to be sent or processed |
| Supports Sequential Terminator property |
Supports Programmable Byte Tracking (e.g. ‘E6’ Header used in T5530 transponders) |
Supports Answer on Request AOR - Password Mode of Atmel/Temic Transponders |
Calibrate-able: Programmable drive frequency and programmable gain amplifiers will calibrate Module for best reading / writing distance |
| Programmable time intervals for full power and sleep operation( Economic Power Mode) |
| Firmware Upgrade Tool | |
 |
|
| This software tool is required to flash new firmware. Release of newer firmware files(encrypted) if available, can be requested by contacting us. | |
| If you have BUILD5-SP1 version and want to upgrade to new V3.0x firmware please request from us the neccessary tools explained in AN520. The above firmware upgrade tool can't be used to migrate from BUILD5-SP1. | |
Firmware Release Information |
V3.00 B13 |
The final firmware version is V3.00 B13. If your firmware version is different please request from us the latest encypted firmware file to upgrade. |