SonMicro Electronics - IC and Modules for RF, RFID and Ethernet

SM125-EK GENERAL FEATURES

Quick development and demonstration of SM125 devices

Adapter or battery operation. Appropriate for most DC adapters those having 2.1mm female jack (range 7.5VDC-15VDC)

On board regulator for 5V and 3.3V operations. Easy to test applications with different voltage sources (* 3.3V requires different firmware version)

LCD connector for 2x16 LCDs.

GPIO and communication pins(I2C/UART) available

3x SMD LEDs can be used for visual effects

SMRFID - easy to use software

125 KHz RFID - COOL FEATURES

User Programmable Assembler Code( ~4K, can be extended).No need for external microcontroller

Upgradable with the specific softwares.Customizable according to user needs

Automatically decodes the Manchester RF 32 / 64 signals with strong manchester decode algorithm and makes data ready to be sent or processed

Supports Sequential Terminator property

Supports Programmable Byte Tracking (e.g. ‘E6’ Header used in T5530 transponders)

Supports Answer on Request AOR - Password Mode of Atmel/Temic Transponders

Calibrate-able: Programmable drive frequency and programmable gain amplifiers will calibrate Module for best reading / writing distance

Programmable time intervals for full power and sleep operation( Economic Power Mode)

IND125-1

Value: 860uH %10
Internal Resistance: 12ohm %10
Dimensions: 65x35mm rectangular in shape ( In the middle of the figure )
Thickness: 0.3mm

IND125-2

Value: 860uH %10
Internal Resistance: 13ohm %10
Dimensions: 90x45mm rectangular in shape ( Outer in the figure )
Thickness: 0.3mm

IND125-3

Value: 860uH %10
Internal Resistance: 13ohm %10
Dimensions: 40x12mm rectangular in shape ( Inner in the figure )
Thickness: 0.4mm